|Home||» Products||» HYDRAULIC COPY TURNING ATTACHMENT||» Hydraulic Lathe Tracer|
Backed by an innovative infrastructure facility and a dedicated workforce, we are able to manufacture, supply and export Hydraulic Lathe Tracer. Operated using hydraulic power, these products have a low energy usage. Known for their optimum performance and effective functioning, these products have earned a high demand among our clients in the international market. Hydraulic Lathe Tracer is available with us in different specifications depending on the requirements of the clients.
GAMUT Hydraulic lathe tracer for copy turning facing and boring. GAMUT LATHE TRACERS are made by Graded Casting and have been Robustly constructed to take maximum cut with hardened tool post and very sensitive and precise Copy-Valve to render trouble free longer service. GAMUT TRACER can be mounted at rear or front of a lathe machine and can be operated by semi-skilled personnel. Inspection time is drastically reduced and production is increased by many times within accuracy of ±0.025mm when use good lathes.
In-built Lubrication System for Tracing Slide.
Hardened Tool post with Quick Change Tool Holder.
Automatic Finish cut system from 0-1.5 mm.
6-Station Servo-actuated Turret for multicut operation (Optional item at extra cost).
Forward and retraction of slide and finish cut operation done manually by single operating handle. Electric push botton remote control at extra cost.
Master carrier for round master and Flat Template Holder (optional at extra cost) can be set easily having arrangement for longitudinal and axial movements.
Power pack having level indicator, special isolator valve for pressure gauge and filters
|Stroke of Tracing Slide in mm||60||90||140||200|
|Minimum centre Height from top of cross slide in mm |
|Max.Dia of Round master in mm||90||90||200||200|
|Max. length of rail in mm||1000||1000||2000||2000|
|Hydraulic Working Pressure in Kg/C²||18||18||14||14|
|Pump Output in LT / Min||9||9||14||14|
|Power Pack H.P.||1||1||1.5||1.5|
|Theoretical Thrust in Kg||190||300||470||470|
|Recommended tool shank in mm||20x20||25x25||32x32||32x32|
GAMUT MACHINE TOOLS All Rights Reserved.