|Home||» Products||» HYDRAULIC COPY TURNING ATTACHMENT||» Automatic Copying System for Lathe|
With persistent hard work and dedication of our efficient team, we are able to manufacture, supply and export Automatic Copying System for Lathe. Top notch quality raw materials have been acquired from the reputable sources of the industry for making these products. Tested by our team of proficient quality analyzers, these products are absolutely free of defects or flaws. Automatic Copying System for Lathe is delivered to the clients in a stipulated time period owing to our extensive distribution system.
Auto Programmed Cycle Tracer System includes Single Axis Tracer with Hydraulic valves, Dual Delivery Power pack, Control Panel, Feed Cylinder to move lathe saddle forward-Reversed and Limit switches.
System is suitably designed to get up to Two-cut Automatic Cycle of Single Axis Tracer.
System is very much suitable where limited dependence on operator required. Operator is only required to load the job, press the start button and unload the job at the end of the cycle.
|Stroke of Tracing Slide in mm||60||90||140||200|
|Minimum centre Height from top of cross slide in mm |
|Max.Dia of Round master in mm||90||90||200||200|
|Max. length of rail in mm||500||500||500||500|
|Hydraulic Working Pressure in Kg/Cm²||18 & 18||18 & 18||14 & 18||14 & 18|
|Dual Delivery Pump Output in LT / Min||9 & 7||9 & 7||14 & 9||14 & 9|
|Power Pack H.P.||1.5/2.0||1.5/2.0||2||2|
|Theoretical Thrust in Kg||190||300||470||470|
|Recommended tool shank in mm||20x20||25x25||32x32||32x32|
GAMUT MACHINE TOOLS All Rights Reserved.